球探网足球即时比分app

智能润滑

categories of news

contact us

Company address: No. 20, Yangsha Road, Chengbei Industrial Park, Qidong City

Phone: (86) 513 83223238

Fax: (86) 513 83638388

Email: qdzx@czmy56.com

Website: czmy56.com

News Center

Your current location : Home >> News
  • Does the roller device use thin oil lubrication?

    The roller device is lubricated with thin oil, which is maintenance-free and easy to operate. Thin oil lubrication is oil bath lubrication, which is more convenient than grease lubrication, because frequent refueling is not required, and maintenance costs are lower. The pendulum hanging mill adopts a pulse dust collector, which is operated automatically by pneumatic ash removal, eliminating manual ash removal operation and dust pollution. The whole process has good green results. Working process for each host
    Release time: 2020-01-02 Clicks: 31

  • Effect of dry oil lubrication

    Some people liken this effect to the effect of trying to lubricate over the room where the cards are spread on the floor: each card easily slips over each other, which reduces the friction between the feet and the floor to a certain extent. The general abrasion of the surface due to constant scraping is usually caused by the presence of foreign bodies in the lubricant (such as dirt, grit or metal particles). This can also cause material damage (
    Release time: 2019-11-19 Clicks: 41

  • Main functions of dry oil lubrication

    Lubricants are substances used to reduce friction and wear on surfaces that move relative to each other. Although this is the main function of lubricant dry oil lubrication, it can also be used as a heat transfer agent, preservative, sealant, and as a means of capturing and exhausting pollutants in mechanical systems. Although grease is a common form of liquid and semi-solid lubricants, it can also be found in other forms
    Release time: 2019-11-19 Clicks: 45

  • Can dry oil lubrication mix together

    However, liquid lubricants (oils) may be impractical due to containment and often difficult and difficult arrangements. The next good thing is grease. Grease is essentially an oil delivery system used to bond lubricants to working mechanisms. Sometimes it is not possible to mix different dry oil lubricants together. Ideally we don't want this-if the machine works acceptable
    Release time: 2019-09-11 Clicks: 51

  • Dry oil lubrication indicates the thinning resistance of oil at high temperatures

    Engine oil viscosity refers to the ease of oil at temperature. Compared to thicker oils with higher viscosities, thin oils have a lower viscosity and tend to pour at lower temperatures. Thin oil reduces engine friction and helps the engine start transmission gear oil in cold weather. A scale was developed. The general classification "XW-XX" is used to label the viscosity. Numbers before "W" (Winter) will oil
    Release time: 2019-09-09 Clicks: 76

  • Dry oil lubrication does not sweep away wear and heat

    Generators and gas turbines will have integrated lubrication systems to prevent damage caused by excessive friction. Generally, a part of the lubricating oil is used in a hydraulic oil system of a hydraulic control device. Lubricants are usually stored and monitored in monolithic stainless and carbon steel tanks. Generator gearbox lube system can have a 3,000 gallon reservoir and turbine oil system
    Release time: 2019-07-29 Clicks: 59

  • Dry oil lubrication reduces costs

    This is another major cause of lubrication related pump failure. Basically, there are two main sources of pollution: particles generated inside the pump due to metal-to-metal contact; and like sand, external debris enters the system through open covers and ports. Lubricant condition testing and monitoring services to maintain and prolong the operating time of gas turbine power generation units, reducing dry oil lubrication
    Release time: 2019-07-29 Clicks: 55

  • Provides larger solutions such as dry oil lubricated bearings

    Provides results in many harsh operating environments. Survival of downtime and unplanned maintenance is important for productive oil and gas operations. When you face drilling and refining, we have the task of providing relatively large solutions for maintaining gears, hydraulic systems, dry oil lubricated bearings, etc. Our industrial lubricants can prolong equipment maintenance intervals and increase them to a greater extent
    Release time: 2019-07-27 Clicks: 71

  • What is the typical use of the engine

    Engine oils, gear oils, hydraulic oils, greases and other lubricants are reliable solutions for many oil and gas applications. Oilfield operations include many processes, including the stages of drilling, completion, workover, stimulation, production, production, collection and transportation of products for processing and refining. Our lubricants often work in mobile benches, pumping stations, compression units and collection areas.
    Release time: 2019-07-27 Clicks: 67

  • Reduced dry oil lubrication production

    Engine oil, gear oil, hydraulic oil and other lubricant solutions for oil drilling and natural gas operations can help equipment cope with many, including wear, high temperatures, heavy loads, water and dirt pollution, oil spills, foam, sludge and rust . Problems with lubrication points, such as scouring and flushing, can cause additional difficulties. If left untreated, these can lead to increased downtime,
    Release time: 2019-07-24 Clicks: 68

  • Grease starts to thicker than oil

    This is true for geared motors. Grease is more adherent than oil and usually lasts longer. It also has the added benefit of helping dirt get in by acting as a sealant. Having said that, if a large amount of particulate matter gets into the grease, its dry oil lubrication can also damage the lubricant, and it is still a good idea to "seal" the lubricant using seals. Grease starts to change over oil
    Release time: 2019-07-03 Clicks: 36

  • Dry oil lubrication replacement lubricant

    One thing that is often seen is lubrication (lubricating oil). Dry oil lubrication replacing the lubricant and choosing the right type can significantly change the performance of the system. This change in lubrication is one of the main reasons for the delay of MSL from launch to Mars. Improper lubrication can cause mechanical parts to wear out and fail. It can also cause annoying sounds and increase power usage. To solve this problem, we need
    Release time: 2019-07-01 Clicks: 36

  • Dry oil lubrication does not require the use of a lot of grease or oil

    Our dry lightning lubricant process is suitable for many metal parts. Dry oil lubrication does not require the use of many greases or oils. Bearings, gears, chains, etc. can now run dry, and dry lightning lubricants can be used with a lot of grease, fuel and oil to further extend service life. For many other components such as gears, valve components, camshafts, crankshafts, cylinder heads and very
    Release time: 2019-07-01 Clicks: 43

  • Low friction due to dry oil lubrication

    The flakes are oriented parallel to the surface in the direction of motion and easily slide on each other, dry oil lubrication results in low friction and prevents contact between sliding parts even under high loads. Large particles perform well on rough surfaces at low speeds, and perform finer on smooth surfaces and higher speeds. These materials can be added to liquid lubricants in the form of dry powder to alter or increase them
    Release time: 2019-06-28 Clicks: 56

  • Dry oil lubrication is commonly used in applications such as locks or dry lubricated bearings

    Dry lubricants or solid lubricants are materials that, despite being in the solid phase, can reduce friction between two surfaces without the need for a liquid oil medium. The two main dry lubricants are graphite and molybdenum disulfide. They provide lubrication at temperatures above liquid and oil-based lubricants. Dry oil lubrication is commonly used in applications such as locks or dry lubricated bearings. This material can be used in oxidizing environments.
    Release time: 2019-06-28 Clicks: 66

  • The choice of lubricant depends on, for example, the operating temperature

    Most bearings will last longer than the equipment on which they are installed. However, although bearings account for a relatively small percentage of equipment failures, they occasionally fail. When they fail, expensive repairs and downtime. When a bearing fails, only a few failures are caused by material fatigue. Most failures are caused by usually possible conditions. Often the cause of bearing failure
    Release time: 2019-06-10 Clicks: 26

  • The role of solid film lubricants

    For information on our standard oils and greases, see our Thin Oil Lubricants. Greases are simply oils mixed with thickeners, so they remain in the bearings. Greases are generally suitable for heavy loads and have long-lasting lubrication without maintenance. Surprisingly, too much grease can be bad for bearings. High grease filling means big rolling
    Release time: 2019-06-10 Clicks: 30

  • What are the common applications of lubricants

    A common application of lubricants is to reduce friction between surfaces, but not all lubricants are the same. In this handy guide, we will introduce some common lubricants, how they work and when to use them. You want to lubricate something without the inherent resistance of using grease. You need to lubricate to suck in small spaces without separating things. Thin oil
    Release time: 2019-06-08 Clicks: 31

  • Is there a differential pressure signal device on the dual-cylinder filter

    The dual-cylinder filter has a differential pressure signal device. When the pressure difference between the inlet and outlet of the filter exceeds 0.10-0.15MPa, the pressure difference signal device sends out an alarm signal to notify the switch of the working filter cartridge in order to clean or change the filter (the device is designed in the front). High time. ) The cooler water inlet has a direct-reading thermometer and a
    Release time: 2019-06-08 Clicks: 49

  • Lubrication system for metallurgy

    Suitable for separately provided lubrication systems for metallurgy, heavy machinery, mining and other mechanical equipment. Its working medium has a viscosity of N22-N460 (equivalent to ISOVG22-460) industrial lubricants, and a tube oil cooler is used as a cooling device. PN of oil lubricating device is 0.63MPa; filtration accuracy at low viscosity is 0.08mm, at high viscosity
    Release time: 2019-06-05 Clicks: 45

Total 232 20 Articles per page Pages: 1/12
2 3 4 5 6 7 8 9 10 下一页 尾页 1 2 3 4 5 6 7 8 9 10 Next Last
online service
share it
Welcome to leave us a message
Please enter your message here and we will contact you as soon as possible.
Name
Contact person
phone
Landline / mobile number